If you plan to do the electrical installation at home independently, it is important to understand the basic things about electrical wiring. If you have difficulty when installing electrical wiring at home, it never hurts to ask for help Electrician Colorado Springs in order to avoid electrical accidents at home.
To find out how to install electricity safely, let’s consider the following explanation!
Know the size of the power cord needed
You need to pay attention to the size of the cable diameter, capacity, and usefulness of the cable you need. The size of the power cable determines how much amperage capacity.
If the size of the cable that is installed does not match the number of amperes needed, it can cause a short circuit of electrical current and fire.
Know the difference in color codes on the power cable
The color code on the power cable is related to the size of the conductor wire inside the cable and the power it has. For example, the white NYM power cable measuring 3 x 2.5 mm for a maximum power of 900 VA, while the size of 3 x 4 mm serves for a maximum power of 5500 VA.
The color code of the power cord that is not related at all to power and size, but based on standards of use. In alternating current (AC) for example, black wire for current sources, blue wire for neutral conductors, and green wire for grounding or containment.
How to install power cables
When installing cables, you will need to remove the plastic that surrounds the metal sheath. It’s important to do it carefully so it doesn’t damage the metalcore. The installation procedure is quite easy but requires a little skill to produce a neat electrical installation.
Protect the power cord with a conduit pipe
In electrical systems that use a lot of wires, conduit pipes are usually needed to keep the electrical installation line neat. Even though the protective layer has been protected or insulated, an electrical short circuit can occur as a result of damage to the cable wrapper.
Conduit pipes can protect all parts of the power cord well, especially from rodents. Also, note how many cables are enough for one conduit pipe, this depends on the size and material of the conduit pipe used.
Know what is the maximum use of the power cable
In an electrical connection, there is usually a maximum limit on the number of electric cables used. Excessive cable installation can cause damage to the switch, household electronics, and the entire electricity network. This is usually marked by a power outage in electronic objects that are used or in the entire electrical current in the house.
This event is quite dangerous because it can cause damage to the entire electricity network at home. If this happens, immediately turn off all electronic devices that are on and then turn on the electricity back down.
After knowing how to install safely, you still have to be careful when practicing, yes. However, not all cable installations can be done alone. Electrical cable installation in the service panel which is the center of the electrical connection at home should only be done by a licensed expert.