You’ll have water injury, and in addition drywall that must be fixed, if your home floods. If you determine to do this make sure you have a drywall dust or HEPA filter put in-in any other case you’ll just find yourself blowing the mud all through the room. This will seal the joint compound, cover the repaired area, and prepare it to accept paint. Apply mesh tape around the uncooked edges of the joints and begin applying joint compound in easy even strokes as instructed above.
Apply a small dab of joint compound to the screw heads to cowl them up. As soon as again after the joint compound has cured, easy the floor with sanding block and paint with a flat primer coat after which apply final matching paint for the final word fix in the lavatory, bed room or front room designs.
After drying one more time, take some sandpaper to it to clean the edges. Joint Tape-This can be bought in the conventional paper type, which should be applied with joint compound or in fiber tape, which is often used in repairs because it eliminates one step of the process.
With paper, spread a thin coat of mud over the seam, the, utilizing a drywall knife; press the tape into the mud and over the seam. 5. Secure the patch using drywall screws attached via the reinforcement board that you’ve got already installed. These embody a putty knife, mud pans, sanding sponge, sandpaper, drywall tape, and corner instruments.
Place them within the wall close to the edges of the hole and use drywall screws to safe the wooden to the exisiting wall. The idea right here is to maintain the joint compound contemporary so that’s doesn’t dry out-so solely take as much mud out as you should utilize inside 10 minutes.